Laboratory in France

Our laboratories in France (located at Cergy, 30 minutes from Paris) can support your validation and qualification testing needs and adapt to your specific requirements in terms of planning, monitoring, and expertise.

With extensive experience in climatic tests, along with a deep understanding of automotive requirements and constraints faced by electronic products throughout their lifecycle, our experts are ready to support your validation and qualification tests.

Before, during, and after testing, our experts can support you with investigating and finding solutions to issues, thanks to ISO committee members in the EMC or environmental domains.

Visual inspection and cross-section analysis can be performed under IPC-A-610 certification in our Lab after a test campaign to detect any hidden weaknesses in PCBs, components, or solder joints.

Our labs are always eager to support new customers.
Do not hesitate to contact us at [email protected] to learn more about our testing capabilities, to request a quote, or for any other information. You may also fill out the contact form here.

Download lab presentation

Electromagnetic compatibility (EMC)

Test equipment:

Standards available :

  • 4 Anechoic chambers (radiated immunity and emission up to 6GHz)
  • 1 Faraday chamber (for BCI and Stripline up to 1GHz)
  • 1 Reverberation chamber (immunity up to 6GHz)
  • 2 Robots (for handy transmitter and ESD)
  • 6 Test benches for electrical tests (ESD, transient immunity and voltage variations)
  • CISPR25
  • ISO 11 452-2, ISO 11 452-4, ISO 11 452-5, ISO 11 452-8, ISO 11 452-9, ISO 11 452-11
  • MIL STD 461, DEF STAND 59-411
  • ISO 7637-2, ISO 7637-3
  • ISO 10 605
  • ISO 16 750-2

Environmental testing

Test equipment

Standards available
  • 21 Climatic chambers for high (up to +180°C) or low (up to -70°C) temperature
  • 7 Climatic chambers for temperature and humidity variation (up to 10°C/min)
  • 3 Climatic chambers for fast temperature variation (12°C/min)
  • 3 Climatic chambers for thermal shock tests (-40°C/+85°C)
  • 3 Shaker machines (up to 13kN)
  • 2 Thruster machines (up to 2500 m/s²)
  • 1 Rate table for IMU characterization
  • EN 60068-2-1, EN 60068-2-2, ISO 16 750-4
  • EN 60068-2-78, EN 60068-2-30, EN 60068-2-38, ISO 16 750-4
  • EN 60068-2-14 Nb, EN 60068-2-14 Na, ISO 16 750-4
  • IEC 60068-2-6, IEC 60068-2- 64, ISO 16750-3
  • IEC 60068-2-27
  • IEC 60068-2-32

Visual inspection and cross-section

Test equipment

Standards available
  • 1 Binocular
  • 1 Microscope
  • 1 Chain saw
  • 1 Pressure coating device
  • 1 Polisher
  • IPC-A-610 certification 

Photo Gallery

 

alt="" alt="" alt="" alt=""
alt="" alt="" alt="" alt=""

Lab References

Our lab is NF EN ISO 17025:2017 accredited by COFRAC, the only reference body in France, and recognized by ILAC MRA. Please visit https://tools.cofrac.fr/annexes/sect1/1-7289.pdf and use accreditation number 1-7289 for details regarding covered activities and the validity of accreditation.

Laboratory is approved by most OEMs, particularly :

  • STELLANTIS CS-00244
  • FORD FMC-1278 (see https://fordemc.com/recognized-laboratories/)
  • GM GMW3097
  • JLR EMC-CS v1.0 (see http://emc.jaguarlandrover.com.edgesuite.net/)
  • GEELY CEVT 8888621494/1

Ask for other OEMs

Lab Address: Veoneer France Safety Systems SAS – 21 Rue Du Petit Albi – Bât. C4 – Hall 404- 95800 CERGY – FRANCE

Email : [email protected]

Veoneer
close
search